Cortelco 586002-TP2-27F - Manual (Page 11)

586002TP227F User’s Manual 11
Once you have a compatible Headset, locate the headset jack on the side of the Handset. First, remove the protective
rubber cover. Plug the headset cord into the jack. Do not force the connection.
When a Headset is connected, the microphone on the Handset is muted to limit the effect of background noise.
Your cordless Handset is also equipped with a Belt Clip. Align the pins located on the inside edge of the clip with the
notches on the sides of the Handset. The belt clip should snap securely into place.
10 Talk Display
After you make a call, the Handset can either continue to display the phone number you dialed, or it can display a call
timer to help you keep track of the call duration. The Handset is preset to display the timer. If you want to reprogram
this option, from the idle mode:
Press Menu/OK, and then press ▲ or ▼ until you see >Display.
Press Menu/OK again. Press ▲ or ▼ until you see >Talk Display.
Press Menu/OK again. Press ▲ or ▼ to choose >Time or >Number, and then press Menu/OK to confirm.
Press DEL/Mute twice to return to the idle screen.
11 Direct Call
This feature allows you to program a phone number, which will automatically be dialed each time you press Talk or
SPK to initiate a call. To program Direct Call:
Press Menu/OK, and then press ▲ or ▼ until you see >Direct Call.
Press Menu/OK again. Enter the phone number. If you make a mistake, press DEL/Mute to backspace.
When finished, press Menu/OK. You will see >Save. Press Menu/OK to confirm.
You will now see Direct On/Off? >On. Press Menu/OK to confirm.
Press DEL/Mute to return to the idle screen.
NOTE: When you use Direct Call, you cannot enter additional digits after the call has been placed.
WARNING: EMERGENCY NUMBERS SUCH AS 911 WILL NOT WORK WHEN DIRECT CALL IS ENABLED.
WARNING: When you turn Direct Call on, your programmed number will be dialed each time you press Talk or SPK.
To turn this feature off, follow the above steps. When you see Direct On/Off?, use ▼ to scroll to >Off, and then press
Menu/OK to confirm.
Press DEL/Mute to return to the idle screen.
12 Caller ID / Call Waiting ID
Your Handset is compatible with Caller ID and Call Waiting ID services, available from your local telephone service
provider. There are fees associated with these services. Contact your service provider for details.
Reviewing Call List
Your Handset stores 20 Caller ID / Call Waiting records. Once CID memory is full, the oldest record will be
automatically deleted when a new record is stored. To review CID records:
With the Handset in idle mode, press CID.
Press ▲ or ▼ to scroll through the stored CID records.
When finished, press DEL/Mute to return to the idle screen.
A previously reviewed CID record will display a check mark to the right of the caller’s name.
Dialing from CID
With the desired CID record displayed, press Talk.