KEYENCE SL-R11E - Manual (Page 11)

Chapter 1 Specifications
1-5
1
ENGLISH
<Specification>
System Switching type
Input power supply voltage AC 100 to 240 V ±10 % (50/60 Hz)
Overvoltage category
Output voltage
DC 24 V ±10 %, Class 2
II
Ripple/noise 240 mVp-p or less
Output capacity 1.8 A
Ambient temperature -10 °C to +55 °C (non-freezing)
Relative humidity 35 % to 85 % RH (non-condensing)
Pollution degree 2
Withstand voltage AC 1,500 V, 1 min. (between all external terminals and case)
Insulation resistance At least 50 M Ω (DC 500 V mega, between all external terminals and case)
Supply voltage interruption 10 ms or less
Power consumption 135VA
Weight (excluding dedicated brackets) Approx. 240 g
Model SL-U2
Environ-
ment
10 to 55 Hz, 0.7 mm (0.03") compound amplitude, 20 sweeps each in X, Y, and Z directions
100 m/s 2 , 1,000 iterations each in X, Y, and Z directions
Vibration resistance
Shock resistance
WARNING
For the power supply used for the SL-C Series and SL-R11E, always use a power
supply that can fully satisfy the above requirements or use recommended SL-U2
power supply. Otherwise, the UL61496-1 requirements may not be satisfied and the
SL-C Series and SL-R11E may not be recognized as a safety component.