Command processing flow – KEYENCE CV-X Series User Manual
Page 16
Advertising
‐ 16 ‐
KEYENCE CORPORATION. Vision System Division
www.keyence.com
2
Command execution procedure
✎
Command Processing Flow
There are two methods for executing a command: "PLC Terminal" and "Polling". If "Polling" is selected, terminal control
is not required but the communication for polling is required, and the command execution may be slower than "PLC
Terminal".
"PLC Terminal"
Executes a command when the input terminal IN15 "PLC Terminal" is set.
"Polling"
Always monitors (polls) the data memory specified in "Command Execute Address (bit)", and executes a command
when it is set.
Advertising