KEYENCE CA-LML0210 User Manual

Precautions, Macro lens for line scan camera use, Introduction

Advertising
background image

1

Macro Lens for Line Scan Camera Use

CA-LM0210/CA-LML0210

Precautions

This caution sheet describes the precautionary points for using the Macro Lens for the Line Scan Camera
CA-LM0210/CA-LML0210.
Read this caution sheet before using the product in order to achieve maximum performance.
Keep this caution sheet in a safe place after reading it so that it can be used at any time.

„

Symbols

This caution sheet uses the following symbols so that you can recognize important messages at aglance.
Please read it in its entirety.

.

Fixing points of the Main Unit (In the case of the CA-LM0210. However, the CA-LML0210 is the same)

Fix to the surrounding gray points using the Macro Lens dedicated mounting stand or a stand with a similar structure.

Introduction

It indicates a situation which, if not avoided, could result in product damage as well

as property damage.

Precautions Concerning Installation

• When installing this device, always secure the Lens Main Unit side at the specified

points (surrounding 2 points) using the Macro Lens dedicated mounting stand

(OP-87337: optional) or a stand with a similar structure.

• If secured at one spot on the Lens Main Unit side or Camera side only, due to falling etc., an

accident or malfunction may occur and may be the cause of damage. Please do not do so.

• This device is a precision device, take preventative measures in an environment

where vibration or shock will contact the device. If an environment where vibration

and shock contacting the device continues, it may cause malfunction or damage.

• Use such things as an insulating base when installing the equipment. Ensure that the

equipment insulation is secured. Since the Lens and the Camera are case grounded,

when there is a difference in potential or there is noise and when installed directly

without secured insulation, it may be the cause of device damage or incorrect operation.

• For fixing the Lens Main Unit, do so using the 2 points specified below. If it is fixed using points

other than those specified, it may cause damage to the Main Unit or interfere with operation.

NOTICE

NOTICE

48.4

112.9

M46 P=0.75

ш51.5

ш52.5

ш56

ш48

(142.4)

17.526

7

4

C-Mount

ш30

ш53.5

ш55

ш50

10

15

30

20.2

96M11638

Advertising
This manual is related to the following products: