Compatible Systems MicroRouter 1200i - Manual (Page 9)

Chapter 1 - Introduction 3
Chapter 3 - Network Installation
Here you will find step-by-step instructions on how to physically install
the MicroRouter 1200i and connect it to your local Ethernets and your
wide area network(s). Instructions are included for twisted-pair
Ethernet environments and fractional or full T1’s, as well as modems,
56K CSU/DSUs, and ISDN Terminal Adapters.
Chapter 4 - CompatiView Software Installation
This part of the manual describes how to install CompatiView, Compat-
ible Systems’ GUI (Graphical User Interface) management software
which is included with your router.
Chapter 5 - Command Line Preparation
This part of the manual provides basic instructions on setting up
command line management and text-based configuration.
Chapter 6 - Basic Configuration Guide
This section provides a list of parameters that must be entered into a
router for proper operation.
Appendices
This part of the manual includes additional information that might be of
interest to you such as technical specifications, default settings
(including the default factory password), and instructions for down-
loading current software.