KEYENCE SR-600 Series - Manual (Page 2)

2 E SR-600-IM
Checking the Package Contents
1 E SR-600-IM
Read this manual before use.
Keep this manual in a safe place for future reference.
„ General cautions • Take substantial safety measures to avoid any damage in the unlikely event of a problem occurring. • KEYENCE cannot guarantee the functionality or performance of units that have been modified or used with specifications other than those described in this manual. • When the SR-600 Series is used in combination with other devices, functions and performance may be degraded, depending on the operating conditions and
surrounding environment. • Parts of this manual may not be used or duplicated without express permission.
• The contents of his manual are subject to change without notice.
• This product is just intended to detect the object(s). Do not use this product for the purpose to protect a human body or a part of human body. • This product is not intended for use as explosion-proof product. Do not use this product in hazardous location and/or potentially explosive atmosphere. „ Safety precautions for laser product The SR-600 Series uses a visible semiconductor laser, with wavelength of 660 nm, as a
target pointer for adjusting the reading position.
„ UL Certifications The SR-600 Series is an UL/C-UL Listed/Recognized product.
• File No.: E207185, Category: NRAQ/NRAQ7, Applicable standard: UL508
• File No.: E167973, Category: NWGQ2/NWGQ8, Applicable standard: UL60950-1
Be sure to follow the specification below.
• Use a power supply that provides Class 2 output defined in NEPA70
(NEC: National Electrical Code). • Pollution degree: 2
• Overvoltage category: I
„ FDA (CDRH) Regulations The SR-600 Series complies with the following FDA (CDRH) regulations. Applicable regulations: 21 CFR Part 1040.10, Class 1 Laser Product The classification is based on IEC60825-1 according to the Laser Notice No. 50 issued
by FDA (CDRH). „ CE Marking The SR-600 Series complies with the essential requirements of EMC Directive and Low-
voltage Directive.
The following harmonized standards are applied.
Applicable standards (EMI):
EN55011, Class A
EN55022, Class A (EMS): EN61000-6-2 EN61000-6-1 (LVD): EN60825-1, Class 1 Laser Product * We conducted the test on the combination with the SR-600 series and the communication units (N-R2/UB/R4/L1) to confirm the conformity. „ FCC Regulations The SR-600 Series complies with the following FCC EMI regulations.
• FCC 47 CFR Part 15, Subpart B, Class A, Digital devices
„ Canada IC (Industry Canada) Regulations The SR-600 Series complies with the following IC EMI regulations.
• ICES-003, Class A, Digital apparatus
DANGER Failure to follow instructions may lead to death or serious injury.
WARNING Failure to follow instructions may lead to injury.
CAUTION Failure to follow instructions may lead to product damage or
malfunctions.
Note Provides additional information on proper operations that can be
easily mistaken.
Reference Provides advanced and useful information for operation.
Safety Information for SR-600 Series
CAUTION Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
Laser pointer Wavelength 660 nm Output 90 μW Pulse width 200 μs Laser class Class 1 laser product IEC60825-1
WARNING Follow the instructions mentioned in this manual. Otherwise,
injury to the human body (eyes and skin) may result. Precautions on class 1 laser products
• Do not stare into the beam.
• Do not disassemble this product. Laser emission from
this product is not automatically stopped when it is
disassembled.
Operating Precautions
CAUTION
• Do not use a voltage other than 5VDC with the SR-600 Series. Doing so may lead to damage on the unit. • When using the dedicated communication units (NX-50 Series, N-R2/R4/UB/L1, or DV-90 Series), use a power
supply within the appropriate range for each unit. • Be sure to turn the power off to devices attached to the SR-600 series when you plug or unplug the cables.
Failure to do so may cause damage to the SR-600 Series. • Do not disassemble or modify the SR-600 Series. Doing so may lead to damage on the unit. • Keep the cables away from high-tension cables or power sources. Otherwise, noise could cause malfunctions or
accidents. • The SR-600 Series is a precision instrument. Do
not apply shock to the
instrument or drop it. Be
especially careful when
transporting or installing
the unit.
• Do not hold the SR-600 Series by its cable. The
units may become
damaged if they strike
each other.
• Do not allow water, oil, dust, or other foreign substances to stick to the scanner. This may cause read errors. Use a
soft, dry cloth to wipe any substances from the scanner.
(Do not use a cloth dipped in alcohol or other cleaning
substance.)
Regulations and Standards
2D Code Reader (Fixed Type) SR-600 Series
Instruction Manual
96M11490
Main unit (SR-600/610/600HA)
Instruction Manual Mounting bracket x 1
Insulating spacer x 2
Washer x 2
Installation screws (M3) x 2
Part Names and Functions
(1) Scanner: Reads 2D codes and barcodes.
(2) Cable: Cable length is 1.8 m.
(3) Connector
(Round connector): Connects to the power supply and communication
unit (N-R2/UB/R4/L1). The connector can be used for
serial communications with external devices.
(4) USB Connector: Connects to a PC to change settings with AutoID
Navigator. The connector is type A. Cable length is
130 mm from the section where the cable splits.
(5) USB connector cap: When the USB connector is not in use, place the cap
on the connector to prevent the entry of dust and
contact with surrounding metal objects.
(6) Cable holder: When the USB connector is not in use, place the
USB cable in the cable holder so that it does not
move around.
(7) Multiple LED indicator: Displays the operation status including the bank
number upon successful decoding, reading stability
and operation mode.
(8) IN LED: Lights up when an input terminal is on.
(Default settings: Displays the Input terminal 1 state)
(9) OK/NG/ERR LED: • Lights green when a OK signal is output.
• Lights orange when an NG signal is output.
• Lights red when an ERROR signal is output.
(10) TUNE switch: Use this switch to perform the following operations.
Refer to the user manual for more details.
• Turn on the laser pointer for reading position
adjustment
• Display registered parameter banks
(Up to16 banks can be registered.)
• Start parameter tuning
• Read all of the program codes
• Reset errors
(11) TEST switch: Use this switch to perform the following operations.
Refer to the user manual for more details.
• Start and stop test mode
• Run 1 reading operation
• Run the multi-reading mode
• Fix the communication settings to the default
values when sending and receiving the settings
(7) Multiple LED
indicator
(9) OK/NG/ERR LED (10) TUNE switch
(11) TEST switch
(1) Scanner
(3) Connector
(round connector)
(2) Cable
(4) USB connector
(5) USB connector cap
(8) IN LED
(6) Cable holder