Z detailed symbology settings – KEYENCE BL-N70 Series User Manual
Page 62
A-4 Settings and the Factory Default Values
-8
Ap
pend
ices
z Detailed symbology settings
Setting item
Setting content
UPC/EAN
EAN13
ON (Enabled)
OFF (Disabled)
EAN8
ON (Enabled)
OFF (Disabled)
UPC-A
ON (Enabled)
OFF (Disabled)
UPC-E
ON (Enabled)
OFF (Disabled)
Extended UPC-A
Send 12 digits
Send 13 digits
UPC-E settings
System code 0 omitted
System code 0 added
Handling
Supplementals
2 digit add-on enabled
2 digit add-on disabled
5 digit add-on enabled
5 digit add-on disabled
Reading the
Supplemental
codes only
ON (Enabled)
OFF (Disabled)
Check digit
Send the UPC-A check digit
Do not send the UPC-A check digit
Send the UPC-E check digit
Do not send the UPC-E check digit
Send the EAN 8 digit check digit
Do not send the EAN 8 digit check digit
Send the EAN 13 digit check digit
Do not send the EAN 13 digit check digit
CODE128
(EAN128)
EAN128
ON (Enabled)
OFF (Disabled)
Sending ]c1
Send
Do not send
Group separator
[GS]
[SPC]
Highlighted items indicate factory defaults.