Connecting the power supply, Connecting the power supply -11, Caution – KEYENCE N-410 User Manual
Page 33: Applicable terminals for power supply connection
2-11
2-3
Connecting and Wiring to the N-R4 Series
Inst
allatio
2
Connecting the Power Supply
Connect the 24 VDC power supply to the power supply terminal block as shown in the figure.
Do not use a power supply other than 24 V DC. Otherwise, product failure
may occur.
Applicable terminals for power supply connection
The dimensions of crimp contacts used for wiring should be as follows:
Power supply
DC 24VDC
Twisted pair cable
* Although the figure shows the model "N-R2", the power supply
terminals are located in the same position on all models.
+10%
-20%
Caution
Terminal
Dimensions
Round Terminal
a : 6.0 mm Max.
Y terminal
a : 6.0 mm Max.
Item
Description
Wire size
AWG 14 to 22
Tightening torque
0.49 N·m (4.34 lbf·in)
Wire material
Copper
Wire type
Stranded wire
Electric wire
temperature rating
+60°C