KEYENCE KV Series - Manual (Page 70)

Chapter 2 Editor
2-46
2
2.5 Entering Comments/Labels
This section describes how to enter comments/labels to contacts, how to change
these comments/labels, and how to enter/change line comments.
2.5.1 Editing comments/labels
The label name, comment 1, comment 2, and comment 3 can be entered for a
contact.
Comments are entered so that the contents of a contact can be easily deduced
when editing a ladder diagram. Comments are displayed in the ladder diagram
monitor, the simulator and the monitor.
Manipulate the "Edit Comment/Label" dialog box. This dialog box is displayed for
each device type, and allows you to edit two or more comments at a time.
The label name and comment can also be changed by selecting the device to be
changed in the ladder diagram.
➮ Making changes directly in the ladder diagram (p. 2-49)
The comment/label edit method is described below.
Note: The comment 2 and comment 3 files are dedicated to the Ladder Builder for
KV. When the comment is to be shared with the KV IncrediWare (DOS), use com-
ment 1.
Editing the list for each device
Comment ➔ Edit Comment/Label (Ctrl + F7)
1. Select "Edit Comment/Label" from the "Comment" menu, or click the button.
The "Edit Comment/Label" dialog box is displayed.
The relays 0000 to 0415 are displayed by default.
The "*" symbol is displayed beside devices used in the ladder diagram.
2. Select the device to be edited in the "Reading Device" area.
3. Specify the device range to be displayed in the list in the "Device Range" area.
Reading device
selection area
Label/comment
input area
Device list display
area
KVSKA Chap 02.P65 08.3.11, 11:28 AM 46