Cobra Electronics 7700 - Manual (Page 11)

20 21
The 7700 Pro will now display your current map position along with a small summary
screen that displays the estimated journey time and distance to your first destination.
●
Stage 1/2 - indicates this is the first destination
of the journey
●
Distance to first destination
●
Estimated time of arrival to first destination.
●
Total distance of multi-route journey
●
Estimated time of arrival at the end of multi-
route journey. If, during the journey, you wish to cancel the current stage and begin
travelling to the next stage in your multi-route journey press the summary screen
and the message ‘Delete current stage?’ will be displayed. Press ‘OK’ and the unit will
calculate your route to the next stage in the multi-route from your current position.
Note: If the 7700 Pro is turned ‘OFF’ and then ‘ON’ during the multi-route journey the
device will retain the current route and ask you if you wish to continue with the current
destination or with the next stage of the destination or to cancel the multi-route.
●
Enter the address using the keypad that is displayed. If you make a mistake when
entering any field you can press the key at the bottom of the keypad to erase the
data and then re-type the information. When you have entered the correct postcode
press the ‘Set’ button on the keypad.
●
The destination will now appear in the multi-route screen. Repeat the steps above to
enter further destinations.
●
Once you have entered all your destinations press ‘Save’.
Editing the Multi-route
If you wish to change the order or delete any of the multi-route destinations, press one of
the destinations listed and some new options will appear near the bottom of the display.
●
To move the selected destination press the ‘UP’ or ‘Down’ arrow.
●
To delete the destination press the ‘Trash Can’ icon.
●
To return to the destination list press the ‘Return Arrow’.
Note: These functions only apply to the destination that you have selected. To edit the
other destinations in the list press the ‘Return Arrow’ and select the new destination.
Once you have made your desired changes press ‘Save’.
Using the Multi-route
Now press ‘Calculate’ and the 7700 Pro will calculate the route to each destination and
provide a new summary screen with the distance to each destination along with the
estimated duration of the journey to each destination from the start point.
●
If you wish to view the calculated route on a map, press ‘Map’.
●
If you wish to start using the Multi-route, press ‘Go’
NAV7700_QSG.indd 20-21 8/5/09 8:14 AM