Panasonic L-X025 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Precautions

■ Lens Care

• Sand and dust can damage the lens. Make

sure that no sand or dust gets inside the lens
or the terminals when using the lens on a

beach, etc.

• This lens is not waterproof. If drops of water

get onto the lens, wipe the lens with a dry
cloth.

• Do not press the lens with excessive force.
• When there is dirt (water, oil, and fingerprints,

etc.) on the surface of the lens, the picture may be
affected. Lightly wipe the surface of the lens with a
soft, dry cloth before and after taking pictures.

• Do not place the lens mount facing downwards.

Do not allow the lens contact point © to become

dirty.

■ About Condensation (Fogging of the

Lens)

• Condensation occurs when there are differences

in temperature and humidity as described below.
Condensation can cause the lens to become dirty

and lead to mold and malfunctioning, so exercise
caution in the following situations:

-When the camera is brought indoors from outside

during cold weather

- When the camera is brought into an air-

conditioned car

-When cold air from an air conditioner is directly

blown onto the lens

-In humid places

• Put the camera into a plastic bag to allow it to

acclimate to the surrounding temperature in order

to prevent condensation. If condensation occurs,
turn the power off and leave it for about two hours.

Once the camera acclimates to the surrounding

temperature the condensation will go away

naturally.

5

VQT1D41

Advertising