Panasonic FV-08VRL1 - Manual (Page 8)

PRACTICAL GUIDE TO INSTALLATION
Properly insulate the area around the fan
to minimize building heat loss and gain.
(Fig. 16)
Loose fill or batt insulation can be placed
directly over the fan housing in the attic.
Panasonic fans and fan / light combination
units do not create excessive heat that is
a common problem with recessed light
fixtures or some competitors' fan / light
combinations. Our efficient, cool-running
motors and our fluorescent lamp do not
create enough ambient heat to be subjected
to these limitations.
4 inches or 6 inches roof jack,
waii cap, or soffit vent with backdraft
damper.
Mechanicaiiy connect duct to termination
and seal with mastic or approved foil
faced tape.
2-3 ft straight run before eibow..
in attic instaiiation, _
caulk box to drywall --------------^
Short piece of fiexibie duct heips
aiignment and absorbs sound.
Ciamps pius mastic or approved
foii faced tape at all flex joints.
Foil tape tightly covers all metal
duct joints (glue PVC joints).
Fig. 16
SPECIFICATIONS
Model No.
Air
direction
Voltage
(V)
Frequency
(Hz)
Duct
diameter
(inches)
Noise
atO.rWG
(sones)
Power
consumption
(W)
Speed
atO.rWG
(rpm)
Air voiume
at O.rWG
(CFM)
Weight
Ib.(kg)
FV-08VRL1 Exhaust 120 60
4 0.8 20.5 1378 80
8.2(3.7)
6 0.8 20.5 1378 80
HVI Certified performance based on HVI Procedures 915, 916 and 920.
PRODUCT SERVICE
Warning Concerning Removal of Covers.
The unit should be serviced by qualified technicians only.
Your product is designed and manufactured to ensure a minimum of maintenance.
Should your unit require service or parts, call Panasonic Call Center at 1-866-292-7292 (USA)
or 1-800-669-5165 (Canada).
Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
www.panasonic.com
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.ca
© Panasonic corporation 2012
Printed in China T0911-1022 08VRL4021A