Single stage heating, Instruction, Keep the door closed – Panasonic NE-3280 User Manual
Page 10: Press program entry button, Press memory pad you wish to program, Press power level selector pad four times, Set the desired heating time using timer dial, Nn i uu, Press program entry button again, Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HowMQ^p^rate
C. PROGRAMMING MEMORY PADS
♦
Single stage heating
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 11)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program cooking on DEFROST power for 1 minute into Memory pad
PAD
INSTRUCTION
DIGRAL DISPLAY WINDOW
Keep the door closed.
Digital Display Window must be blank or show “0"
o
PROG
Press Program Entry Button.
^
“PROG" will start to blink.
-m-
0
Press Memory pad you wish to program.
The selected pad number will appear and currently programmed
information will be indicated.
5^
U
III..
POWER
Press Power Level Selector pad four times.
The selected power level will be indicated, “PROG” and 1st Stage
Heating Indicator “1" will start to blink.
n
u
Set the desired heating time using Timer Dial.
The set heating time will appear.
Note: up to 15 min. on HI or MED, 60 min. on LOW, DEF or HOLD
( n n
I u u
o
PROG
Press Program Entry Button again.
“PROG” and 1st Stage Heating Indicator “1” will stop blinking.
This means that you have completed programming.
PMd
*5
f n n
t u u
Three seconds later. Digital Display Window will go blank.
Note:
Program the remaining Memory pads as desired by repeating steps 2-6 above.
When you want to select Memory Area B, press Memory Shift pad ES before selecting the desired Memory pad
{step 3).
-
10
-