Installation and set-up – Panasonic TX21S3TP User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION AND SET-UP
Choose the desired language from the
OSD language selection.
Press TV/AV button to start ATF.
TV stations will be located, sorted into
order and stored ready for use. *'*
OSD Laiguage
PL CZ RO
H PY G B
The first available channel will be displayed.
Switch the VCR test signal 'Off'.
Programme change
Volume adjust
The sorting order depends upon the TV signal, the broadcasting system, and reception conditions. If the order is not to your
preference it can be rearranged. Refer to the Tuning menu Swap feature - see page 9 for details.
It is important that you only use TV programme position ‘O'to view your VCR. If your VCR picture does not appear on programme
position ‘O' (the VCR position), it will be necessary to either adjust the RF channel of the VCR or to adjust the tuning of the TV's
programme position 'O' until the RF output of the VCR is received.
6