A&D Weighing HVL-CS - Manual (Page 7)

Page 7 HVL-CS Instruction Manual v3.0
6. Weighing
To weigh a patient the following steps should be carried out:
1. Ensure that the chair is correctly positioned with the black brake tabs at the
rear of the chair.
2. Ensure that the safety brakes are firmly applied and that the footrest is in the
up position.
3. Ensure the seat is empty and switch on the scale.
4. Wait for the reading to show 0.00 kg
5. Assist the patient into the chair and lower the footrest, placing the patient's
feet comfortably.
6. Watch for the STABLE circle to light and then read the weight from the
display.
7. Raise the footrest and assist the patient in leaving the chair.