A&D Weighing PW-200 - Manual (Page 4)

PW-200 Users Manual V1.0
3. Installing the Batteries
Step 1 Turn off the display.
Step 2 Press and slide to open the external
cover. Press the hook of the internal
cover to the left side and lift the cover.
Step 3 Insert six new dry cells ensuring correct
polarity (+,-). Battery size is `D'
Step 4 Close the covers opened in step 2.
C a u t i o n s
Replace used dry cells with six new ones, when is displayed.
Do not mix used and new batteries. It may cause damage to the battery or
product.
Check the polarity when installing the batteries. If you do not observe this it may
cause battery leakage. Also if the polarity of a battery is wrong the scale may
only work temporarily.
The battery life is dependent upon the environmental temperature. Remove
batteries from the display unit when the scale is not to be used for a long time.
They may leak and cause damage.
Damage which is due to battery leakage is not covered under warranty.