Rear – Abstract Data ADE-20 User Manual
Page 3
Page 3 of 4
1V OCT CALIBRATION: User adjustment and fine-tuning of 1V OCT response
This single trimmer can be adjusted clockwise to increase
the frequency range available with 1V OCT tracking
(i.e. if the tuning is flat) or it can be adjusted counter-clockwise
to decrease the frequency range available with 1V OCT tracking
(i.e. if the tuning is sharp)
(Please see ‘CALIBRATION’ on page 4 of this guide)
MAIN CALIBRATION:
Factory calibration for overall filter response and performance
Please do not make any changes to the settings of these trimmers
(Please see ‘CALIBRATION’ on page 4 of this guide)
POWER CONNECTOR: Doepfer-style 16-pin IDC Socket. The ADE-20 uses the Doepfer standard
for power connection and cable orientation. The RED stripe on the supplied
power cable connects to the NEGATIVE (-12V) rail on the ADE-20 with the
RED stripe facing DOWN. This is marked on the back of the ADE-20 PCB
as “-12 RED”
(Please see ‘PRECAUTIONS’ on page 4 of this guide)
© 2012 Abstract Data Ltd.
http://www.abstractdata.biz
Version 1.1 December 2012
2: Rear