Abstract Data Synthex User Manual
Page 2
Analog Synth & Sound Effects Generator
© 2009 Abstract Data Ltd.
http://www.abstractdata.biz/
Version 1.1 August 2009
Page 1 of 4
ON:
Left: Power On
Right: Power Off
FLIP:
Left: AUDIO IN (1) = Hard Sync / AUDIO IN (2) = FM
Right: AUDIO IN (1) = FM / AUDIO IN (2) = Hard Sync
DIRT:
Left: Oscillator output bypasses the DIRT effects loop
Right: Oscillator output is sent through the DIRT effects loop
LED:
Power On indicator
SHAPE:
Left: Square Wave output
Right: Triangle Wave ouptut
This is a ‘rotary cross-fader’ style control giving a linear fade between the two signals
SYNC:
Far Left: AUDIO IN (1) to Far Right: AUDIO IN (2)
This is a ‘rotary cross-fader’ style control giving a linear fade between the two signals. It operates
in conjunction with the FLIP switch, controlling the Audio Input mix sent to SYNC VOL
FM:
Far Left: AUDIO IN (1) to Far Right: AUDIO IN (2)
This is a ‘rotary cross-fader’ style control giving a linear fade between the two signals. It operates
in conjunction with the FLIP switch, controlling the Audio Input mix sent to FM VOL
PITCH:
Controls the initial Pitch of the internal Voltage Controlled Oscilltor (VCO)
SYNC VOL:
Far Left: None to Far Right: Full
Sets the amount of Audio Signal from SYNC to send to the VCO Hard Sync input
The Hard Sync feature of Synthex is ‘always on’ - if you lower this control to 0 you will get silence
FM VOL:
Far Left: None to Far Right: Full
Sets the amount of Audio Signal from FM to send to the VCO FM input