Acronova NB11 Series - Manual (Page 15)

Version 1.3 Operation Manual, Nimbie NB11
© 2010, Acronova Technology, Inc. 15
B
EFORE
G
ETTING
S
TARTED
Tips for Handling Optical Discs
Never touch the printable or data surface of the disc,
as it may decrease quality and disc lifespan. Refer
to the arrows on the illustration to the right, Always
handle discs from the outer edge or the center hole.
What You Need to Start a Disc Publishing Session
The Nimbie NB11 is a PC-connected publisher, which requires a USB
connection to a host computer. You will need a computer with the
minimum system requirements and compatible software to start a disc
publishing session.
Important Tips for Loading Discs to Nimbie
When the disc loader is empty, do not attempt to
load many discs at once.
First, carefully load only one disc into the disc
loader and assure it is firmly resting on the three
wheels seen in the illustration to the right. You
may then gradually load additional discs on top of
the first disc, until the loader is full.
Nimbie processes discs in a First In, First Out (FIFO)
sequence. During a duplication session, if a disc
refill is required, before the loader becomes empty,
gently load additional discs.
Rejected Discs
Nimbie is designed to have rejected discs
come out underneath the unit. Do not
block the Reject Disc Slot.
Periodically remove rejected discs so that
there is room to accommodate more discs
or raise Nimbie using the provided legs to
increase space underneath for more discs.
Important:
Nimbie will stop operation if a rejected disc cannot clear
the Reject Disc Slot.