System theft protection – Acura 2015 ILX - Navigation Manual User Manual

Page 136

Advertising
background image

135



Audio System

System Theft Protection

Au
d

io

System Theft Protection

The system is disabled when it is disconnected from the power source, such as when
the battery is disconnected or goes dead.

■ Reactivating the System
1. Set the power mode to ON, and turn on the system.

If you set the power mode to ACCESSORY, you will be requested to enter the
security code. See step 3.

2. Press and hold the VOL

9 (Volume/Power) button again for more than two

seconds.

The system is reactivated when the system’s control unit recognizes that the
system is in your vehicle.

If the control unit fails to recognize, “ENTER CODE” appears on the navigation
screen.

3. Enter the security code.

If you do not enter the code correctly after 10 tries, leave the system for one
hour before trying again, or visit a dealer to have the system reset.

1

Audio System Theft Protection

Find the audio system’s security code and serial
number label in your Owner’s Manual kit.

Do not store the label in your vehicle. If you lose
the label, you must first retrieve the serial
number, and then obtain the code from a dealer.

U.S. Only
You can register the security code at Acura
Owners (owners.acura.com.), and find
information on how to retrieve the serial number
and obtain the code at radio-navicode.acura.com.
2 Entering the Security Code P. 228

Advertising