Front turn signal light bulbs – Acura 2015 ILX - Owner's Manual User Manual

Page 279

Advertising
background image

278

uu

Replacing Light Bulbs

u

Front Turn Signal Light Bulbs

Main

tenan

ce

Front Turn Signal Light Bulbs

When replacing, use the following bulbs.

1. Turn the steering wheel all the way to the

opposite side from the light being replaced.
Passenger side: Turn the steering wheel to
the left.
Driver side: Turn the steering wheel to the
right.

2. Remove the holding clips (A), (D) and screw,

pull the inner fender back.

2 Engine Compartment Cover P. 259

3. Turn the socket to the left and remove it,

then remove the old bulb.

4. Insert a new bulb.

Front Turn Signal Light: 21 W

1

Front Turn Signal Light Bulbs

When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.

Insert the clip with the pin raised, and push until it is
flat.

Holding clip (D-type)

Clip

Push until the
pin is flat.

Screw

Inner
Fender

Clip (D)

Clips (A)

Bulb

Socket

15 ACURA ILX-31TX66200.book 278 ページ 2014年3月27日 木曜日 午前10時34分

Advertising