Driving position memory system – Acura 2015 TLX - Owner's Manual (Revised 12/13/2014) User Manual

Page 175

Advertising
background image

174

uu

Operating the Switches Around the Steering Wheel

u

Driving Position Memory System

Co
ntrols

Driving Position Memory System

You can store two driver’s seat (except for power lumbar) and door mirror positions
with the driving position memory system.
When you unlock and open the driver’s door with a remote transmitter, or keyless
access system, the seat and door mirrors adjust automatically to one of the two
preset positions.

The multi-information display shows you which remote transmitter you used to
unlock the vehicle when you enter.
DRIVER 1 transmitter is linked to memory button 1.
DRIVER 2 transmitter is linked to memory button 2.

The driver’s seat moves rearward depending
on the set seating position once you
• Stop the vehicle.
• Put the transmission in

(

P

.

• Turn the engine off.
• Then open the driver’s door.
Once the power mode is in the ACCESSORY
position, the driver’s seat moves forward to
the DRIVER 1 or 2 preset position.

1

Driving Position Memory System

Using the audio/information screen or multi-
information display, you can disable the automatic
seat and door mirror adjustment function.

2 Customized Features P. 126, 259

The driver’s seat easy exit feature:

Can be turned ON/OFF.

2 Customized Features P. 126

System Operation
The system will not operate if:

The vehicle speed is above 3 mph (5 km/h).

Either memory position button is pressed while the
seat is in motion.

The seat position is adjusted while in operation.

The memory 1 or 2 position is set fully to the rear.

DRIVER 1

DRIVER 2

15 ACURA TLX-31TZ36000.book 174 ページ 2014年9月2日 火曜日 午後5時22分

Advertising