Acura 2014 ILX Hybrid - Owner's Manual - Manual (Page 292)

291
uu Replacing Light Bulbs u Rear License Plate Light Bulb
Rear License Plate Light Bulb
When replacing, use the following bulb.
1. Remove the screw from the center of the
fastener using a Phillips-head screwdriver.
2. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
3. Remove the license plate light assembly
by squeezing the tabs on both sides of
the socket.
4. Remove the old bulb and insert a new bulb.
High-Mount Brake Light Bulb
High-mount brake light bulbs are LED type. Have an authorized Acura dealer inspect
and replace the light bulbs.
Rear License Plate Light: 5 W
Fastener
Lining
Clip
Socket
Bulb
14 ACURA ILX IMA-31TX86100.book 291 ページ ２０１３年３月７日 木曜日 午後１時１４分
QRG
Index
2014 ILX Hybrid
Main
tenan
ce
TOC