Acura 2014 TSX - Owner's Manual - Manual (Page 180)

Continued 179
uu Bluetooth® HandsFreeLink® u HFL Menus
This command group allows you to change or customize HFL basic settings.
■
To set a four-digit passcode to lock the HFL system for security
1. Say “System Setup.”
2. Say “Security.”
3. Follow the HFL prompts and say the four-digit number of your choice.
4. Follow the HFL prompts and confirm the number.
■ To change the security passcode
1. Say “System Setup.”
2. Say “Change Passcode” after the prompts.
3. Say the new four-digit passcode after the HFL prompts.
4. Follow the HFL prompts.
■ To select a ring tone or a prompt as the incoming call notification
1. Say “System Setup.”
2. Say “Call Notification” after the prompts.
3. Say “Ring Tone” or “Prompt” after the prompts. For no audible notification, say
“Off.”
■ System Setup 1 System Setup
Press the button before a command.
Once a passcode is set, you are required to enter the
passcode with every new key cycle to use HFL.
If you forget the code, go to your dealer to have the
passcode reset. You can also cancel the passcode by
clearing all the data stored in the HFL system.
2 To clear the system P. 180
The default setting of the incoming notification is a
ring tone.
14 ACURA TSX 4D-31TL16500.book 179 ページ ２０１３年６月１７日 月曜日 午前９時４０分
QRG
Index
2014 TSX
Features
TOC