Trailer stability assist – Acura 2007 MDX - Owner's Manual User Manual

Page 372

Advertising
background image

If you turn off the VSA, the trailer
stability assist function also shuts off.
Press and hold the VSA off switch
until you hear a beep (see page ).
The VSA activation indicator comes
on as a reminder. Press and hold the
switch again to turn the system on.

The function turns on every time you
start the engine along with the VSA,
even if you turned it off the last time
you drove the vehicle.

The control unit monitors the VSA
circuitry and the braking system. If
there is a problem with the brake
lighting system, the trailer stability
assist function shuts down and the
‘‘CHECK TRAILER STABILITY
ASSIST’’ message appears on the
multi-information display.

If you see this message, have your
vehicle checked at your dealer as
soon as possible.

In this case, your vehicle still has the
VSA traction and stability
enhancement, but it will not have the
trailer stability assist function.

I

f there is a problem with the VSA

system, the system and Trailer

Stability Assist shuts off. The VSA

system and VSA activation indicators

also come on (see page

).

The ABS indicator and the brake

system indicator may also come on

along with the VSA system indicator.

If you see these warning indicators,

have your vehicle checked at your

dealer as soon as possible.

351

352

Trailer Stability Assist

Trailer Stability Assist Failure

368

Main Menu

Table of Contents

Advertising