Acura 2006 RL - Owner's Manual - Manual (Page 376)

Install the new bulb into the
socket.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
(Driver’s side)
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket.
Remove the left or right side
engine compartment cover (see
page
).
(Passenger’s side)
Use a flat-tipped screwdriver to
remove the holding clip from the
windshield washer reservoir.
If you are replacing a driver’s side
bulb, slide the battery toward the
engine to get more clearance (see
page
).
Reinstall the battery and the
battery cover.
Reinstall the engine compartment
side cover.
1.
2.
4.
5.
6.
7.
8.
3.
4.
362
391
CONTINUED
Lights
Replacing a Front Position/Side
Marker Light Bulb
Ma
int
e
na
nce
375
BULB
HOLDING CLIP
Main Menu Table of Contents