Acura 2002 NSX - Owner's Manual - Manual (Page 59)

If you leave the lights on with the
ignition switch in ACCESSORY (I)
or LOCK (0), you will hear a
reminder chime when you open the
driver’s door.
To change between low beams and
high beams, pull the turn signal lever
as far as it will move towards you,
then let go. The blue high beam
indicator will light (see page
).
To flash the high beams, pull the
turn signal lever back lightly, then
release it. The high beams will come
on and go off.
The high beams will stay on for as
long as you hold the lever back, no
matter what position the headlight
switch is in.
Your car has Daytime Running
Lights (DRL) in addition to the
headlights. With the ignition ON (II)
and the light switch OFF or at ‘‘
’’,
DRL turns on when you release the
parking brake. DRL turns off when
you turn the ignition off or the
headlights on.
The rotating switch on the left pod
controls the lights. Turning this
switch to ‘‘
’’ turns on the parking
lights, taillights, instrument panel
lights, side-marker lights, and rear
license plate lights. Turning the
switch to ‘‘
’’ turns on the
headlights.
52
Headlights
Daytime Running Lights
(Canadian Models)
Steering Column Controls
Instruments and Controls 56
Main Menu