Acura 2001 TL - Owner's Manual - Manual (Page 244)

CONTINUED
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Open the hood.
Reinstall the radiator reserve tank.
If you need to change a bulb on
the driver’s side, remove the
radiator reserve tank.
Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
The front side marker/turn signal
light bulb and parking light bulb use
the same bulb.
If you are changing the bulb on
the driver’s side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger’s side, turn
the steering wheel to the left. 1.
3.
4.
7.
6.
5.
1.
2.
Lights
Maintenance
Replacing Front Turn Signal and
Side Marker Light Bulbs
241
B B U U L L B B
T T A A B B
Main Menu Table of Contents