Service station procedures – Acura 2000 NSX - Owner's Manual User Manual

Page 134

Advertising
background image

Service Station Procedures

3. Lift the engine cover.

4. NSX-T

Pull the support rod out of its clip
and insert the end into the square

hole in the engine cover bracket.

Except NSX-T

Pull the support rod out of its clip
and insert the end into the square

hole in the window latch bracket.

To Close the Rear Window:

Snap the support rod back into the
clip and lower the engine cover or
roof holder. Pull the rear window

down until it is resting on the body,

then push on the center of the back

edge until it latches. Make sure it is

securely closed before driving away.

Oil Check

Check the engine oil level every time

you fill the car with fuel. Wait a few

minutes after turning the engine off

before you check the oil.

1. Remove the dipstick (orange

handle).

CONTINUED

Before Driving

DIPSTICK

ENGINE COVER

SUPPORT ROD

NSX-T

ENGINE COVER

NSX

Main Menu

Table of Contents

Advertising