Lights – Acura 2000 Integra Sedan - Owner's Manual User Manual
Page 210
Lights
Replacing Rear Bulbs (in Trunk
Lid)
1. Open the trunk.
2. Use a Phillips-head screwdriver to
remove the two screws from the
bulb holder. Remove the holder
from the taillight assembly.
3. Try the tail/stoplight and back-up
lights to verify which bulb needs
replacing. Remove that bulb from
the socket by pushing it in slightly
and turning it counterclockwise.
4. Install the new bulb in the socket.
Test it to make sure it works.
5. Reinstall the bulb holder assembly.
Install the two screws and tighten
them securely.
Replacing a Rear License Bulb
1. Remove the two screws and
remove the license light assembly.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
Maintenance
CONTINUED
Main Menu
Table of Contents
Main Menu