Advanced Elements AE1040 - Manual (Page 8)

TM
8
Figure 1
1. Your AirFusion kayak comes direct from the factory with the Bow and Stern Ribs, as well as
the main inflation tubes already installed. However, should you take your kayak apart, you
will need to place the Bow and Stern Ribs into each end of the kayak and secure the bottom
of them into place using the Velcro loops at the bottom position.
2. With the main tube chambers deflated, insert each set into the outer cover, making sure the
valves are facing inwards. Make sure the large Velcro closed ends of the tube sleeves are
placed in the stern end of the kayak. Align the Velcro squares on the outer side of the tube
sleeves with the Velcro squares of the inner side walls of the outer cover. Additionally, be
sure to connect the large Velcro squares at each end of the tube sleeves.
See Figure 2.