AERCO AERClean User Manual

Overview

Advertising
background image

Created: 10/13/2010

Revised: 11/11/2010

Owner: BS-Manager_V.D.

DOC#: TID-0001-0A

Page: 1 of 12

Technical

Instruction

Benchmark Low NOx Series

AERClean Filtration System Instructions

159 Paris Ave. Northvale, NJ 07647 Phone: 201-768-2400 FAX: 201-768-7789

Doc#

TID-0001-0A

Overview

The AERClean Filtration System assembly (

P/N 29161) is available for installation to the com-

bustion intake duct of the the Benchmark Low NOx Series boilers to prevent particulate air-borne

debris from entering the air fuel valve, burner, blower, and other internal components. The AER-

Clean Filtration System is for use in boiler installations drawing air directly from the boiler room.

Advantages of using the filter include:

• Consistent performance in dusty environments.

• Prevention of unnecessary and unplanned service expenses.

• Easily accessed filters for inspection, replacement, or even cleaning.

Installation differs between the 1.5/2.0 and 3.0 models and each is treated seperately in the ap-

propriate section. Optional kits include a pressure gauge and a pressure switch. Several filter op-

tions are also available (see page 6).

Kit P/N

Description

29161 AERClean Filtration System Kit

Dwyer Magnehelic Pressure Gauge

58032

58034 Adjustable Diff. Pressure Switch

Notes

Base Kit

Optional Kit
Optional Kit

Filter

Housing

(P/N

39124)

Air Filter

(P/N 87002, 87003,

87004, or 87005)

Hose Clamp

(2 ea) (P/N

123583)

Flexible Hose

(P/N 97004-18)

Filter Collar

(P/N 39127)

Sheet Metal Screws (10 ea)

(P/N 54010)

Base AERClean Filtration System Kit P/N 29161

The basic filter assembly kit components are shown below:

Base and Optional Kit Part Numbers

Tools and Materials Needed

Note 1:

The flexible hose (P/N 97004-18) and hose clamp (P/N 123583) are used in the Benchmark 3.0

boiler only, and NOT in the Benchmark 1.5 or 2.0 boilers.

Screwdrivers

Two 2”x 4” wood pieces (8” long)

Socket driver for drill

Drill set for self tapping screws

UL 181 Aluminum tape (BMK1.5/2.0 only)

Tube fittings, Manometer (testing of 58034)

Note 2:

A selection of filter types for varying environmental conditions is available for use in the AERClean

Filtration System. Filters are sold separately. See page 6 for more information.

SOLD

SEPARA

TELY

Advertising