Aerco/protonode gateway, Gf-129 – AERCO ProtoNode Gateway Rev 1 (with internal LEDs) User Manual
Page 19
Advertising
Page 19 of 64
USER MANUAL
AERCO/ProtoNode Gateway
OMM-0080_0D
AERCO International, Inc.
• 100 Oritani Dr. • Blauvelt, New York 10913 • Phone: 800-526-0288
VD2:011712
1
GF-129
• If necessary, press “3” to and change the IP Gateway
• Type in a new IP Gateway and press <Enter>
• Note: If the ProtoNode is connected to a router, the IP Gateway of the ProtoNode should be set to
the IP address of the router that it is connected to
• Unplug Ethernet cable from PC and do not connect to network hub or router.
Advertising