AERCO Belimo AF120-S US Actuator - Manual

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA
55
Dimensions (Inches [mm])
min. 3 1/2"
[90]
min. 3/4"
[20]
IND-AF2 Position Indicator
(optional)
Remove
for 3/4”
to 1.05”
shafts
IND-AF2 Position Indicator
(optional)
Installation Instructions
Quick-Mount Visual Instructions for Mechanical Installation
Quick-Mount Visual Instructions
1. Rotate the damper to its fail-safe position.
If the shaft rotates counterclockwise, mount the “CCW” side of the actuator out.
If it rotates clockwise, mount the actuator with the “CW” side out.
2. If the universal clamp is not on the correct side of the actuator, move it to the correct side.
3. Slide the actuator onto the shaft and tighten the nuts on the V-bolt with a 10mm wrench to 6-8 ft-lb of torque.
4. Slide the anti-rotation strap under the actuator so that it engages the slot at the base of the actuator. Secure the strap to the duct work with #8 self-tapping screws.
NOTE: Read the “Standard Mounting” instructions, on the next page, for more detailed information.
M40024 - 05/10 - Subject to change.
© Belimo
Aircontrols (USA),
Inc
.