AERCO Coil & Riser Replacement - Manual

AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, New York 10913 • Phone: 800-526-0288
TID-0004_0A
HE-109
TECHNICAL INSTRUCTIONS
Revised: 06/20/2011
Hardware Procedure:
Coil and Riser
Replacement
Procedures for All Styles
of A, B, C, and D
Indirect-Fired Water
Heaters
Applies to:
Indirect-Fire Water Heaters.
Description of Document:
This Technical Instruction Document
provides the instructions necessary for
removal and replacement of Coil
Assemblies and Risers contained in
AERCO Indirect-Fired Heat Exchangers.
These instructions must be performed
by a skilled service technician capable
of exercising the necessary safety
precautions when working with high
temperature, pressurized steam and
water systems.
Coil Assembly in Water Heater Heat Exchanger
NOTE
The original document was formatted as
an Application Guide,
HE-109, but has now been changed
To a Technical Instruction Document
( TID-0004), to better conform to the new
document definitions.