Agasio M105I - Manual (Page 19)

- 19 -
MFN-E-A3
All the above information are set up when the device is ready. Users generally do
not need to change. In case of any accidental loss, user needs to re-obtain the domain
name, and fill it himself, juts do as the above, the user’s name is just the first four
characters, and this is for remote access. For example, http: //abcd.ipcam.hk, the
user’s name is abcd. The password is DDNS. (The password can be obtained on the
device body or contact the supplier). When connected, it displays "xxxxx is OK" on
DDNS state; it means that it was successfully set. If you need to use your own
Dynamic DNS, please select the appropriate service providers (on DDNS service)
then enter the following information, then save it;.
3.4.10. SMTP Settings
The above setting is a preparation for the alarm function, the sender’s email
address should be entered by the sender，while the recipient E-mail address is filled in
by recipient 1,2,3,4. SMTP server should be filled in the sender email SMTP server，
for example the sender email address is [email protected]，then here enter mail.163.com.
Generally SMTP port is 25，no need to change. If the SMTP port required to check,
just tick it, and enter SMTP user name and SMTP password, which are provided by
Email provider，then test according to reference. If report needs to send, please tick
report internet IP by Mail. The e-mail server and other information can be obtained