Agasio M66I - Manual (Page 7)

- 7 -
MFN-E-A2
Ethernet interface: RJ-45 network interface.
Backup: follow-up product extend interface.
About GPIO alarm interface (S terminal) definition:
1# +DC12V
2# RS485（A）
3# Earth（GND）
4# IO2 （OUT PUT）
5# RS485 （B）
6# IO1 （IN PUT）
GND: Ground，alarm input ground，RS485
ground
RS485: RS485 control interface，left
connection RS485 negative right connection RS485 positive. connect P/T decoder，
support variety PTZ protocol.
2.2. 2.2. 2.2. 2.2. IIIInstallation nstallation nstallation nstallation
IP camera process image transmission on the network through the usage of
Internet technology, which offers DDNS function for static IP, dynamic IP and PPPoE
dialing users. IP Camera can connect to outer net through LAN, which can also be
connected directly.
There are 3 commonly used network connections in IP Camera:
2.2.1. Installation in LAN.
This is the most popular network access method. As long as there is a router, using
internet cable directly connect router to IP Camera, then IP Camera can be connected
to Internet as normal PC, as showing in the following picture: