Using the accessories, Gfci instructions, Working with detergents – Cub Cadet 1400E User Manual

Page 4: Caution, Warning

Advertising
background image

USING THE ACCESSORIES

5

This wand features a 0º pencil jet which rotates 360º for maximum dirt cutting action,
effectively increasing cleaning performance up to 50%. This wand combines the cleaning
performance of a 0º pencil jet with the surface coverage of a wide angle nozzle.
Not recommended for soft materials, siding, painted surfaces, decks or autos.

Rotating spray wand

Vario spray wand

The Vario spray wand allows you to adjust the cleaning pressure. To clean at maximum
pressure, the Vario wand must be positioned to the high pressure setting (+).
To apply detergent, the wand must be positioned to the low pressure setting (-).

For lower

pressure turn

wand collar in the

minus (-) direction.

For higher

pressure turn

wand collar in the

plus (+) direction.

GFCI INSTRUCTIONS

6

WORKING WITH DETERGENTS

Detergents can only be applied at low pressure (-).

Step 1

Install the Vario spray wand.

Set the Vario spray wand to the low pressure
setting (-) by turning the wand collar. The
wand must be set in the low pressure (-)
position to apply detergents.

Step 3

Turn on the pressure washer.

Pull trigger to operate unit: Liquid detergent
is drawn into the unit and mixed with water.
Apply detergent to work area. Do not allow
detergent to dry on surface.

For best results see Cleaning
Tips on pages 8 & 9 for specific
information on how to clean
different surfaces.

Always Use Cub Cadet
Detergents for Best Results.

Cub Cadet biodegradable detergents are
specially formulated to protect the
environment and your pressure washer.
The special formula won’t clog the suction
tube filter and will protect the internal
parts of the pressure washer for a longer
life. For Cub Cadet Detergents, check
your retailer or call:

Step 2

Fill the detergent reservoir with

Cub Cadet detergent. Place the filter end of
detergent suction tube into the detergent
reservoir

Caution

Never use:

• Bleach, Chlorine products and other

corrosive chemicals

• Liquids containing solvents

(i.e., paint thinners, gasoline, oils)

• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.

WARNING

TO AVOID SERIOUS INJURY,
NEVER POINT SPRAY NOZZLE
AT YOURSELF, OTHER PER-
SONS OR ANIMALS.

Dealer Referral Line

1-877-835-7841

or visit our website: www.cubcadet.com

Step 1

Plug the Ground

Fault Circuit Interrupter (GFCI)
into a working outlet.

Step 2

Press “TEST”, then

press “RESET” to assure proper
connection to power.

Note:
The actual
appearance
of the GFCI
may be
different
from this
illustration.

The following Cub Cadet detergents
are available:

• Vehicle Wash

• Deck Wash

Part # KR-9103501

Part # KR-9103502

• Degreaser

• All Purpose Cleaner

Part # KR-9103503

Part # KR-9103504

Advertising