ALM ALM001 - Manual (Page 8)

The various symbols used to represent screens and there available settings are;
Random skip. Set triggers will be randomly skipped
dependent on value set here - the higher the value more
likely a skip is to occur.
Delay. Delays triggers by 1/96th's of a beat. It is
automatically limited by the set multiplier up to full beat.
Divider. A divider for which trigger the delay prior alters. I.e a
Setting of 2 means every other trigger would get delayed, 3
every third. Use to produce shuffle effects.
Trigger or pulse width. Widen the base trigger width in
1/96th's of a beat. It is automatically limited by the set
multiplier up to a full beat. If the trigger is a divisor it is
possible to go beyond 96 and into actual beat widths - the
trigger now essentially becomes a gate. The symbol will
change to a large ‘N’.
Initial skip: Skips the set amount of initial triggers.
Rotate. The will offset divisors by the specified value in
beats. It is useful for creating basic rhythms - i.e a snare on
every 2nd beat. This option is only available to divisors
To exit back to the main trigger screen at any point again push and hold the
program knob for approximately 1 second.
ALM-001 - ‘Pamela’s Workout’
8