ALTANA Wave-Scan Short Instructions - Manual

269 020 584 E 0806
Additives & Instruments
A member of
Measure what you see.
BYK-Gardner GmbH · Lausitzer Strasse 8 · 82538 Geretsried · Germany · Tel. +49-8171-3493-0 · Fax +49-8171-3493-140 · www.byk.com/instruments
Please note detailed operating instructions on CD-ROM.
ENGLISH
wave-scan Operation
mode-wheel:
• Switch on press
• Show menu press
• Select function scroll
operate-button:
• Switch on, activate selected
function and measure.
operate
How to measure?
Setup 
Beeper ü
Confirm with mode ü
Language *}
Info }
Date/Time }
Display Time }
Navigation Symbols:
 Back to previous menu
} Go to sub-menu
3
Function activated
* Guide to language menu
Display of measurement results:
Main menu
Measure
Memory }
Standard }
Organizer 1 }
Organizer 2 }
• Select the desired “Measure” mode:
Measurement with statistics and auto-saving.
Accuracy check on the reference tile.
Test procedures to be defined and down-
loaded via the smart-chart software.
Memory Mode • Place instrument on sample.
Measure Sample 01 • Press and hold operate button, while moving
the unit across the surface until the green
light switches off.
Sample-name
Number of measurements
Actual readings
Statistical data (for n>1)
SAMPLE 01 n = 2/3
X S
du 8.3 8.9 0.5
Wa 10.8 11.5 0.4
Wb 17.4 17.8 0.6
Wc 8.7 9.2 0.7
Wd 12.3 12.8 1.1