Cisco OL-18988-01 User Manual
Page 6
8-6
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP and SIP)
OL-18988-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
Information URL
URL of the help text that appears on the phone.
Directories URL
URL of the server from which the phone obtains directory information.
Messages URL
URL of the server from which the phone obtains message services.
Services URL
URL of the server from which the phone obtains Cisco Unified IP Phone
services.
DHCP Enabled
Indicates whether DHCP is being used by the phone.
DHCP Address
Released
Indicates the setting of the DHCP Address Released option on the phone’s
Network Configuration menu.
Alternate TFTP
Indicates whether the phone is using an alternative TFTP server.
Forwarding Delay
Indicates whether the internal switch begins forwarding packets between the
PC port and switched port on the phone when the phone becomes active.
Idle URL
URL that the phone displays when the phone has not been used for the time
specified by Idle URL Time, and no menu is open.
Idle URL Time
Number of seconds that the phone has not been used and no menu is open
before the XML service specified by Idle URL is activated.
Proxy Server URL
URL of proxy server, which makes HTTP requests to non-local host
addresses on behalf of the phone HTTP client and provides responses from
the non-local host to the phone HTTP client.
Authentication URL
URL that the phone uses to validate requests made to the phone web server.
SW Port Configuration Speed and duplex of the switch port, where:
•
A—Auto Negotiate
•
10H—10-BaseT/half duplex
•
10F—10-BaseT/full duplex
•
100H—100-BaseT/half duplex
•
100F—100-BaseT/full duplex
•
1000H—1000-BaseT/half duplex
•
1000F—1000-BaseT/full duplex
•
No Link—No connection to the switch port
PC Port Configuration
Speed and duplex of the switch port, where:
•
A—Auto Negotiate
•
10H—10-BaseT/half duplex
•
10F—10-BaseT/full duplex
•
100H—100-BaseT/half duplex
•
100F—100-BaseT/full duplex
•
1000H—1000-BaseT/half duplex
•
1000F—1000-BaseT/full duplex
•
No Link—No connection to the PC port
Table 8-2
Network Configuration Area Items (continued)
Item
Description