ALTANA BYK-Gardner Dip Viscosity Cups Zahn Type User Manual
Page 5
Advertising
4
Description
The Gardner Dip Viscosity Cup (Zahn Type) is
designed to meet the parameters of ASTM 04212.
It is constructed of a solvent and corrosion
resistant stainless steel and consists of a bullet-
shaped cup which can hold up to about 48 ml.
The viscosity range of the cup is determined by a
precision-drilled orifi ce in the bottom of the cup.
A 12 inch loop handle allows the cup to be dipped
into a liquid container. At the top center of the loop
handle is a nameplate.
The nominal orifi ce diameters of the different
Gardner Dip Viscosity Cups (Zahn Type) are shown
below:
Cup No.
Nominal Orifi ce
Diameter
(in.)
1
.08
2
.11
3
.15
4
.17
5
.21
Description
Advertising