Adding servers, Add servers at the altiserv system, Add servers at the vrm server – AltiGen MAXCS 7.0 VRManager User Manual
Page 18
Advertising
14 VRManager Manual
Adding Servers
To add a new MAXCS ACC/ACM server, do the following:
Add servers at the AltiServ system
1.
Make sure the Centralized Storage directory is located on the local
drive on the AltiServ system.
2.
Share the storage directory with Full Control to a domain user or local
administrator.
Add servers at the VRM Server
1.
In the AltiWare ACC or ACM page of VRM Admin, click New.
2.
Enter the MAXCS ACC or ACM Server IP Address, Centralized
Recording Directory (the Share name of the centralized recording
folder), User Name and Password. Then click OK. If the user account
belongs to an NT domain, you must enter “NTDOMAIN;username” in
Advertising