American Access Systems Prox Card Reader - 23-006 - Manual (Page 4)

Page 4 American Access Systems / Security Brands, Inc.
STEP 1-MOUNTING THE UNIT
Mounting the unit to your own pedestal
Your slave units come with a square mounting flange found in the bottom of the box along with four carriage bolts
and four hex nuts. The square mounting flange may be welded to your pedestal and the flange bolt pattern will align
with the back of the unit. Place the unit up to the flange and insert the carriage bolts from the back side. Secure the
unit to the flange by tightening down the hex nuts with a 7/16” socket.
Mounting the unit to an AAS gooseneck (18001) or double height (18003)pedestal
Locate the four carriage bolts and four hex nuts found inside the unit box. Place the unit up to the pedestal flange
and insert the four carriage bolts from the backside. Secure the unit to the pedestal using the four hex nuts and a
7/16” socket. The extra square mounting flange may be discarded.
Mounting the unit to an AAS diagonal pedestal (18002)
Locate the four carriage bolts and four hex nuts found inside the unit box. Place the unit up to the pedestal flange
and insert the four carriage bolts from the backside. Secure the unit to the pedestal using the four hex nuts and a
7/16” socket. The extra square mounting flange may be discarded.