American Diagnostic Corporation (ADC) Diagnostix Desk Charging Base - Manual (Page 2)

1. A SPECIAL THANK YOU
Congratulations on your purchase of an ADC ® Diagnostix™ Desk Charging Base.
ADC ® professional diagnostic products are the instruments of choice where
accuracy and dependability are critical.
This feature rich instrument was designed to simplify physical exams and non-
invasive diagnostics with proper use and care it will provide many years of
dependable service.
Read this booklet thoroughly before attempting to use your new ADC ® Diagnostix™
Desk Charging Base.
2. INTRODUCTION - INTENDED USE
This manual is for the ADC ® Diagnostix™ Desk Charging Base. The charger base is
manufactured for use with ADC or compatible 2.5v or 3.5v power handles and
instrument heads. The base is designed to recharge compatible power handles.
If you have any questions, call our toll-free number or visit our website. For contact
information, see the last page of this instruction booklet.
Please note that the ADC ® Diagnostix™ Desk Charging Base is only suitable for
charging ADC ® instruments operated with ADC® rechargeable batteries.
Do not use with any other equipment. To learn more, visit our website at:
www.adctoday.com.
3. WARNINGS AND PRECAUTIONS
You have purchased a high quality ADC ® Diagnostix™ Desk Charging Base which
has been manufactured to the highest quality standards and is subject to rigorous
quality control. Read these instructions for use carefully before putting the unit into
operation and keep them in a safe place.
If you should have any questions, call our toll free number or visit our website. Our
address can be found on the last page of this booklet.
Please note that all instruments described in these instructions for use are only to
be used by suitably trained personnel. The safe functioning of this instrument is
only guaranteed when original parts and accessories from ADC
® are used.
Attention:
There may be a risk of gases igniting when the instrument is used in the presence of
flammable or combustable gases. Working in areas with good ventilation is
recommended.
Never attempt to take the instrument apart!
There is a danger of life-threatening electrical shock. Unplug the instrument
before cleaning or when disinfecting.