Antari B-200 - Manual (Page 3)

2
User Manual
Antari B-200 Bubble Machine
Congratulations on the purchase of your new
ANTARI Bubble Machine
Introduction
Thank you for choosing the ANTARI B-200 Bubble Machine. You now own a rugged
and powerful state-of-the-art machine. Prior to use, we suggest that you carefully read
all of the instructions. By following the suggestions found in this user manual, you can
look forward to the reliable and satisfactory performance of your ANTARI Bubble
Machine for years to come.
Please follow these operation, safety and maintenance instructions to ensure a long
and safe life for your bubble machine.
CAUTION!
Pay attention to all warning lables and instructions printed on the exterior of your
Antari Bubble Machine. This appliance must be earthed.
Danger of Electric Shock
․ Keep this device dry.
․ Keep the bubble machine upright.
․ For inside use only. Not designed for outside use.
․ For the 110 V models, use 3-prong grounded electrical outlet only. Prior to use take
care to determine that the unit is installed at the rated voltage.
․ Do not overfill your bubble machine. Overfilling will cause the unit to leak.
․ Do not tilt or angle the bubble machine. This may result in bubble liquid spilling out of
the liquid tray.
․ Turn off or unplug the machine when not in use.
․ This machine is not water-proof or splash-proof. If moisture, water, or bubble fluid gets
inside the housing, immediately unplug the unit and contact a service technician or
your ANTARI dealer before using it again.
․ No user serviceable parts inside. Refer to your ANTARI dealer or other qualified
service personnel.
․ This appliance must be earthed.
․ For adult use only. The bubble machine must be installed out of the reach of children.
Never leave the unit running unattended.
․ Never aim the output at open flames.
․ Extended use may make surfaces where the bubbles land slippery.
․ Position output of bubbles away from persons.