Antari S-120 - Manual (Page 3)

3
Antari S-120 Foam Machine
Congratulations on the purchase of your new
ANTARI Foam Machine.
Introduction
Thank you for choosing an ANTARI Special Effects Machine. You now own a rugged and
powerful state-of-the-art machine. Prior to use, we suggest that you carefully read all of the
instructions. By following the suggestions found in this user manual, you can look forward
to the reliable and satisfactory performance of your ANTARI Foam Machine for years to
come.
Please follow these operation, safety and maintenance instructions to ensure a long
and safe life for foam machines.
CAUTION
Danger of electric shock
․ Keep this device dry.
․ For inside use only. Not designed for outside use.
․ For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take
care to determine that the unit is installed at the rated voltage.
․ Always unplug your ANTARI Snow or Foam Machine before filling its tank.
․ Keep foam machine upright.
․ Turn off or unplug when not in use.
․ This machine is not water- or splash-proof. If moisture, water, or snow/foam liquid
gets inside the housing, immediately unplug the unit and contact a service technician
or your ANTARI dealer before using it again.
․ There are no user serviceable parts inside. Refer to your ANTARI dealer or other
qualified service personnel.
․ For adult use only. These machines must be installed out of the reach of children.
Never leave the unit running unattended.
․ Never aim the output nozzle directly at people.
․ Locate the machine in a well- ventilated area. Never cover the unit’s vents. In order to
guarantee adequate ventilation, allow a free air space of at least 20 cm around the
sides and top of the unit.
Danger of explosion
․ Never add flammable liquids of any kind (oil, gas, perfume) to the snow liquid.
Pay attention to all warning labels and instructions printed on the exterior of your
ANTARI Foam Machine.
․ Use only the high-quality foam liquid that your dealer recommends.
․
Always make sure there is sufficient liquid in the machine’s liquid tank.
․ If your ANTARI machine fails to work properly, discontinue use immediately. Drain all
liquid from the tank, pack the unit securely (preferably in the original packing material),
and return it to your ANTARI dealer for service.