Antari AF-5 - Manual (Page 5)

5
If your fan comes without a wireless remote, the LED indicator will not flash when the fan is
powered on. Also, turning DIP switch no. 10 to “ON” will not work either.
3. DMX Control：
DMX Connector Pin Assignment
The machine provide 3 or 5 pin XLR connector for DMX connection. Diagram below
indicate pin assignment information
Pin Function
1 Ground
2 Data-
3 Data+
The machine uses one DMX channel for adjusting the fan speed.
DMX setting:
DMX value Function
0~10 fan off
11~92 low speed
93~174 medium speed
175~255 high speed
DMX control will override both manual and wireless control functions.
DMX addressing by DIP switches: