Antari WiFi800 - Manual (Page 7)

7
 Controlling
The Fog 800 application provides you two ways to control your WiFi-800 fog machine:
Timer Mode – allows you to set the fog duration time. Slide the time bar (from 1 to 60
seconds); press ON to start emitting fog. The fog emission will stop once the timer counts
down to zero.
Continuous Mode
– simply press the ON button to emit fog. The machine continuously emits
fog; to stop press the OFF button.
Note: If the ON button is pressed and the machine cannot emit fog, please make sure the
continuous cycle button is turn on.