Antari IP-1500 User Manual
Page 10
10
Pin
Function
1
Ground
2
Data-
3
Data+
DMX512 Settings
The IP-1500 is equipped with a DMX512 system. For connecting a DMX controller, 5-pin
male-female XLR connections are provided at the back of the machine. The machine uses
one control channel for adjusting the output volume. The channel has a DMX value range
of 0 to 255. After connecting a DMX controller, timer functions such as output duration and
interval can be programmed using the DMX controller or the DMX control software. In DMX
mode, the machine cannot be controlled via the built-in control panel nor the W-1 wireless
controller anymore. By using the DMX protocol, fog machines, lighting effects, and other
special effects machines can be interconnected and easily controlled
.
DMX VALUE
FUNCTION
0~5
off (no output)
6~249
output volume control (5~95%)
250~255
maximum output volume (100%)
Note
1. This machine is particularly designed for outdoor applications. Please always unplug
the machine when it is not in use. When reconnecting the power cord, please make
sure there are no foreign objects nor water at the bottom that could prevent proper
ventilation.
2. Please use Antari FLG or FLR water-based fog liquid in order to ensure a satisfactory
performance with thin fog.